Connections - Datalogic CATCHER D531 Series Quick Reference

CATCHER™ D531 SERIES

CONNECTIONS

The scanner and the host system must be switched off before
starting the installation of the scanner. By following this
precaution you prevent any electrical damage.
You are advised to install the scanner in a place with good air
circulation out of direct sunlight.
NOTE
In order to install the scanner:
1. Locate the optimal scanner position in relation to the counter surface.
2. Pay attention to the product flow, the distance to the counter edge and
convenience for the operator.
With the RS232 cable, this accessory device is intended to be supplied by a UL
Listed or CSA Certified Direct Plug-in Power Unit marked "Class 2", rated 5 V,
minimum 350 mA.
With the USB cable, this accessory device is intended to be supplied by a UL
Listed or CSA Certified Power Unit marked "Class 2", or an LPS power source
which supplies power directly to the reader.
RS232 Connection
USB Connection
(if required)
3