Power Supply - Datalogic Magellan 8300 Technical Manual

Power Supply

NOTE
CAUTION
NOTE
Technical Guide
Power Off the Terminal (P.O.T)
Certain units can receive power directly from the terminal (P.O.T.). A
USB adapter "brick" connects the scanner to IBM-USB 12V ports.
Power supplied from the terminal does not include auxiliary power for alterna-
tive scales.
AC Adapter
Units which do not receive power directly from the terminal will use
either a Listed Class 2 or Listed LPS power source which supplies power
directly to the unit. When using such an AC Adapter, make sure to con-
nect using the correct IEC power cord for unique and international power
connections. If the cord will not plug into your AC power receptacle, the
power cord shipped is not compatible with your electrical system. Please
contact your distributor immediately to receive the necessary information
and components to ensure electrical compatibility.
100-240VAC ±10%
Safe operation of your scanner or scanner/scale requires properly grounded
electrical outlets. Be sure to have a qualified electrician certify the earth-
ground connection on circuits which will be used to power the unit.
The scanner is powered on/off by connecting/disconnecting it from its power
supply.
VOLTAGE
Electrical Specifications
FREQUENCY
50-60
Hz
1-7