Operation
Prior to powering on the Jade unit, the installer should ensure that the Jade unit
has been grounded to earth ground. Some models have a Grounding Screw (shown
Figure 3
in
tion instructions.
CAUTION
Power-on
If scanner power is not already on, press the power switch located on the System Control Box to the ON
position. The illustration that follows show the ON/OFF Switch for both models. The scanner arch indi-
cator lights will then show the Startup indication (indicated by arch indicator lights blinking red, green,
page 7
blue as described on
If the scanner is already powered on, but in Sleep Mode (indicated by arch indicator lights blinking blue),
it can be returned to Normal Operation by a host command from the POS.
Figure 3. ON / OFF Switch and Grounding Screw Location
A
B
A
B
POS
POS
POS
POS
Quick Reference Guide
below). Reference the Jade X7 PRG for complete grounding and installa-
). Scanner startup can take several minutes.
Grounding Screw
(not present on all models)
-OR-
ON / OFF
C
D
E
C
D
E
Switch
12V,10.5A
12V
CLASS 1
WIRING
Operation
3