Signal Tables; General Handscanner; Handscanner Connection Via Ble; Gateway - Datalogic HS7500 User Manual

SIGNAL TABLES

General HandScanner

Description LED Connection symbol Battery symbol
Barcode data could be Short green
transferred flashing
Barcode data could not be Red flashing 3
transferred times briefly
Battery charge under 10%
Battery charge under 7%
Switch on HandScanner
with battery charge under
5%
Battery charge under 95%
Battery charge over 95%

HandScanner Connection via BLE

Description LED Connection symbol Battery symbol
HandScanner searches Blue pulsating Blue pulsating
for an end device
HandScanner is con- Blue flashing 2 Blue flashing 2 times
nected to an end device times briefly briefly
HandScanner cannot con- Red flashing 3
nect to the end device times briefly
HandScanner is discon- Red flashing 3
nected from the end times briefly
device
Audio signal Vibration
Short positive Short vibration
beep
Long negative Long vibration
beep
Slow red flashing
Red flashing 3
times briefly
Red flashing 3
times briefly
Pulsating red
Constantly green
Audio signal Vibration
Continuously
rising beep
Short rising Short vibration
positive beep
Negative beep Long vibration
briefly 3 times
Negative beep Long vibration
briefly 3 times

Gateway

Description LED 1 (USB - LED)
Gateway boots up Left to right run through all LEDs alternating Blue / Green until start
1
Gateway is connected to the Constantly green
end device via USB
Gateway is not connected to No feedback
the end device via USB
Gateway searches for a
HandScanner
Gateway is connected to the
HandScanner via BLE
Firmware Update: Gateway is Constantly yellow
in dowload mode
Firmware Update: Hand- Constantly purple
Scanner is flashing / Gateway
deploys
Firmware Update: Gateway is left to right run through all LEDs alternating purple until done
flashing
Firmware Update: successful Long green flashing
Gateway is connected to a
HandScanner and is searching
for more HandScanners
Gateway cannot connect to
another HandScanner
Gateway cannot connect to
another HandScanner but
another HandScanner is trying
to connect
1 It take approx. 2 minutes to boot up.
20
LED 2 (Scanner - LED) LED 3 (Cloud - LED)
Pulsing blue
Constantly green
Constantly yellow Constantly yellow
Constantly purple Constantly purple
Long green flashing Long green flashing
Constantly green
Constantly red
Red flahsing 3 times briefly