Electrical Connections - Agilent Technologies InfinityLab LC Series User Manual

11 Hardware Information

Electrical Connections

Electrical Connections

•
•
•
•
Never use cables other than the ones supplied by Agilent Technologies to ensure
NOTE
proper functionality and compliance with safety or EMC regulations.
1260 Infinity II Flexible Pump User Manual
The CAN bus is a serial bus with high speed data transfer. The two
connectors for the CAN bus are used for internal module data transfer and
synchronization.
The REMOTE connector may be used in combination with other analytical
instruments from Agilent Technologies if you want to use features such as
start, stop, common shut down, prepare, and so on.
With the appropriate software, the RS-232C connector may be used to control
the module from a computer through a RS-232C connection. This connector
is activated and can be configured with the configuration switch.
The power input socket accepts a line voltage of 100 – 240 VAC ± 10 % with a
line frequency of 50 or 60 Hz. Maximum power consumption varies by
module. There is no voltage selector on your module because the power
supply has wide-ranging capability. There are no externally accessible fuses,
because automatic electronic fuses are implemented in the power supply.
269