Replace The Seal Wash Sensor - Agilent Technologies InfinityLab LC Series User Manual

8 Maintenance

Replace the Seal Wash Sensor

Replace the Seal Wash Sensor

Parts required p/n
5067-6172
Preparations
•
•
1 Remove the solvent inlet and outlet tubes from the seal
wash sensor.
3 Remove the seal wash sensor from the module chassis. 4
1260 Infinity II Flexible Pump User Manual
Description
Seal Wash Sensor Pre Assembly
Shut-down the pump.
Remove the seal wash tubing from the seal wash solvent bottle.
2 Press at the sides of the seal wash sensor.
Remove the cable.
226