Warnings And Cautions - Agilent Technologies InfinityLab LC Series User Manual

8 Maintenance

Warnings and Cautions

Warnings and Cautions

Toxic, flammable and hazardous solvents, samples and reagents
WAR N IN G
The handling of solvents, samples and reagents can hold health and safety
risks.
When working with these substances observe appropriate safety

procedures (for example by wearing goggles, safety gloves and
protective clothing) as described in the material handling and safety
data sheet supplied by the vendor, and follow good laboratory practice.
The volume of substances should be reduced to the minimum required

for the analysis.
Do not operate the instrument in an explosive atmosphere.

Electrical shock
WAR N IN G
Repair work at the module can lead to personal injuries, e.g. shock hazard,
when the cover is opened.
Do not remove the cover of the module.

Only certified persons are authorized to carry out repairs inside the

module.
Personal injury or damage to the product
WAR N IN G
Agilent is not responsible for any damages caused, in whole or in part, by
improper use of the products, unauthorized alterations, adjustments or
modifications to the products, failure to comply with procedures in Agilent
product user guides, or use of the products in violation of applicable laws,
rules or regulations.
Use your Agilent products only in the manner described in the Agilent

product user guides.
Safety standards for external equipment
C AU T I O N
 If you connect external equipment to the instrument, make sure that you
only use accessory units tested and approved according to the safety
standards appropriate for the type of external equipment.
1260 Infinity II Flexible Pump User Manual 153