Install The Jet Weaver - Agilent Technologies InfinityLab LC Series User Manual

8 Maintenance

Install the Jet Weaver

Install the Jet Weaver

When Optional Jet Weavers are available for applications which require highest mixing performance, see
chapter Optimizing Performance.
Tools required p/n
8710-0510
8710-0899
5023-2502
Parts required #
1
1
1
1
1
1
2
2
Preparations
Switch off the pump at the main power switch
1 Open the screw of the Jet Weaver metal lid.
1260 Infinity II Flexible Pump User Manual
Description
Open-end wrench 1/4 — 5/16 inch
Screwdriver Pozidrive Shaft
Hex driver SW-6.35, slitted
p/n Description
G4204-68035 Jet Weaver Mixer Kit V35 Quat/Flex
G7131-68035 Jet Weaver Mixer Kit V35 Flex Bio-Compatible
G4204-68100 Jet Weaver Mixer Kit V100 Quat/Flex
G7131-68100 Jet Weaver Mixer Kit V100 Flex Bio-Compatible
G4204-68380 Jet Weaver Mixer Kit V380 Quat/Flex
each containing two 5500-1253
G7131-68380 Jet Weaver Mixer Kit V380 Flex Bio-Compatible
each containing two 5004-0041
5500-1253 Capillary ST 0.17 mm x 130 mm SX/S
Jet Weaver to Multipurpose Valve
5004-0041 Capillary MP35N 0.17 mm x 130 mm SI/SX
2 Remove the metal lid by lifting it up (1) and pulling it out
of the front panel (2).
(2)
(1)
167