3
Using the Module
Setting up the Pump with the Instrument Control Interface
Control Settings
The pump control parameters are in two sections:
•
•
Table 8
Pump control parameters
Parameter
Description
Pump
Enables you to switch the pump On, Off or to a Standby condition.
In the Standby condition, the pump motor is still active, and when the pump is switched on again, it
does not need to be re-initialized.
Automatic Turn On
Module can be turned on at a specified date/time. This feature can only be used if the module power
switch is turned on.
Method Parameter Settings
The pump method setup parameters are in nine sections:
•
•
•
•
•
•
•
•
•
1260 Infinity II Flexible Pump User Manual
Pump
Automatic Turn On
Flow
Solvents A to D
Stoptime
Posttime
Pressure Limits
Timetable
Advanced
Blend Assist
ISET
77