D-Link Discovery Protocol - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide

D-Link Discovery Protocol

This window is used to display and configure the D-Link Discovery Protocol (DDP) settings.
To view the following window, click Management > D-Link Discovery Protocol, as shown below:
The fields that can be configured in D-Link Discovery Protocol are described below:
Parameter
D-Link Discovery Protocol
State
Report Timer
Click the Apply button to accept the changes made.
The fields that can be configured in DDP Port Settings are described below:
Parameter
From Port - To Port
State
Click the Apply button to accept the changes made.
Figure 4-46 D-Link Discovery Protocol Window
Description
Select to globally enable or disable the DDP feature here.
Select the report timer value here. This is used to configure interval between two
consecutive DDP report messages. Options to choose from are 30, 60, 90, 120
seconds, or Never. Selecting Never instructs the Switch to stop sending report
messages.
Description
Select the range of ports that will be used for this configuration here.
Select to enable or disable the DDP feature on the specified port(s) here.
66