Management > Snmp > Snmp Host Settings; Management > D-Link Discovery Protocol; L2 Features > Fdb > Static Fdb > Unicast Static Fdb - D-Link DGS-1100-05 User Manual

4 Configuration
Click Apply to create a new SNMP community.
Management > SNMP > SNMP Host Settings
This SNMP Host Settings page is used to configure the recipients of the SNMP notifications.
The fields that can be configured for SNMP Host Settings are described below:
Item
Host IPv4 Address
User-based Security
Model
Community String
Click Apply to make the configurations take effect.
Management > D-Link Discovery Protocol
For devices that support the D-Link Discovery Protocol (DDP), this page allows users to enable or disable
DDP, and configure the DDP packet report timer.
The fields that can be configured for D-Link Discovery Protocol are described below:
Item
D-Link discovery
Protocol State
Report Timer
Click Apply to make the configurations take effect.
L2 Features > FDB > Static FDB > Unicast Static FDB
The Unicast Static FDB page allows user to view and configure the static unicast forwarding settings on the
Switch.
used to identify members of an SNMP community. This string
is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
Table 4.8
Figure 4.22 – Management > SNMP > SNMP Host Settings
Description
Specify the IPv4 address of the SNMP management host.
Specify the security model. The options to choose from are
SNMPv1 and SNMPv2c.
Specify the community string for the management host.
Table 4.9
Figure 4.23 – Management > D-Link Discovery Protocol
Description
Specify to enable or disable the D-Link discovery protocol feature of
the Switch.
Configure the report timer of the D-Link Discover Protocol in
seconds. The values are 30, 60, 90, 120 or Never. The default is 30
seconds.
Table 4.10
22
D-Link Smart Managed Switch User Manual