Table of Contents
Advertisement
Vital Signs Monitor User Manual
Chapter 6 Spot-checking Mode
Spot-checking mode is used for spot-checking measurement and for management of multiple
patients' spot-checking data.
6.1 Admit Patient
There are following ways to admit patient. If monitor is connected to network server, the patient
information can be synchronized to the network server after admission.
1. Select Menu > Patient Management, click New Patient to enter new patient window.
2. Select New Patient permanent key, or press Admit/create new patient hardkey
(without key sound), the monitor will automatically finish admitting new patient (that is,
series No. will be automatically added by one and other setting items are empty by default).
3. Scan patient barcode by using barcode scanning shortcut key.
In creating new patient interface, user can scan the barcode through scanner. The patient
information is directly updated to this interface according to barcode information, and
user should Confirm it.
In other interfaces, series No. will be automatically added by one, and the patient
information is directly updated to main interface according to barcode information.
6.2 Modify Patient Information
Select Patient Management > Patient Info, or directly click patient information area in main
interface to view or modify patient information (serial No. is not editable).
If the monitor is powered off and restarted, the patient 1 will be automatically selected as current
measured patient, the patient type is adult and the other information is blank.
6.3 Spot-checking Data Review
Select Menu > Review, or directly select Review shortcut key to enter review window.
•
Click page button to turn page.
•
Set Time Span to display spot-checking data in specified period. The valid spot-checking
data in 12 hours before the latest valid spot-checking data will be displayed by default.
•
Filter operation: is to display spot-checking data in specified period. Abnormal value is
displayed in red. Choose Alert to display abnormal value in specified period. Choose Not
Uploaded to display data not uploaded in specified time. All spot-checking data are
displayed by default. The default display will be restored if user exits and enters this
interface again.
•
Upload, Record, Export or Delete is used for uploading, record outputting, exporting or
deleting all spot-checking data in specified period. User can choose patient data manually
and upload as needed, including the data which have been uploaded. Please refer to chapter
Uploading Data to Network Server and Exporting Data Stored in the Internal Storage Device
- 37 -
Spot-checking Mode
Advertisement
Table of Contents
