C Default Settings; Patient Information Default Settings; Alarm Default Settings; Spo Default Settings - EDAN iM3 User Manual

Vital Signs Monitor User Manual

C Default Settings

This appendix documents the most important default settings of your monitor as it is delivered
from the factory.
Note: If your monitor has been preconfigured according to your requirements, the settings at
delivery will be different from the default settings listed here.
C.1 Patient Information Default Settings
Patient Information Settings
Patient Type
C.2 Alarm Default Settings
Alarm Settings
Pause Time
Alarm Latch
C.3 SpO Default Settings
2
SpO Settings
2
Alarm Switch
Alarm Record
Alarm Level
Alarm High Limit
Alarm Low Limit
NIBP/SpO Simul
2
Measurement
Pitch Tone
Sensitivity
SatSeconds (Nellcor
Module)
Sweep
Alert Switch
Alert High Limit
Alert Low Limit
SpO Desat Limit
2
Adult
120 s
Off
ADU
On
Off
Medium
100
90
Off
On
Medium
Off
12.5 mm/s
On
100
90
80%
- 151 -
PED
100
90
100
90
Default Settings
NEO
95
88
95
88