EDAN iM3 User Manual page 118

Vital Signs Monitor User Manual
Recording Type
Continual real-time
recording
8-second real-time
recording
Trend graph
recording
Trend table
recording
NIBP review
recording
Alarm review
recording
Recording manually
NIBP auto triggered
recording
To manually stop recording, click Record again in the related windows.
Description/ Procedure
In monitor mode, enter Menu > System Setup > Recorder, select
Continual in R-T Rec Time, and press Record shortcut key to start or
stop recording.
In monitor mode, select 8 s in R-T Rec Time, set Record Interval as
needed, and press Record shortcut key to start recording. Press the key
again to stop recording or when R-T Rec time ends, the monitor stops
recording automatically. The runtime for each wave is 8 seconds. The
record Interval can be set as: Off, 10 min, 20 min, 30 min, 40 min, 50
min, 1 h, 2 h, 3 h, 4 h.
In monitor mode, select Menu > Review > Trend Graph, click
Record in trend graph window to start recording. Press Record
shortcut key to stop the recording.
NOTE:
When recording the trend graph in monitor mode, if user presses
the Record shortcut key to stop recording in the process of
recording the second parameter trend graph, the paper for
recording will not be left blank after the second parameter trend
graph.
In monitor mode, select Menu > Review > Trend Table, click
Record in trend table window to start recording. Press Record shortcut
key to stop the recording.
In monitor mode, select Menu > Review > NIBP, click Record in
NIBP review window to start recording. Press Record shortcut key to
stop the recording.
In monitor mode, select Menu > Review > Alarm, select one alarm
and click Record in alarm review window to start recording. Press
Record shortcut key to stop the recording.
In spot-checking mode, press Record shortcut key in main interface to
output current measurement value and patient information;
In spot-checking or Ward round mode, click Record or press Record
shortcut key in Review window to output corresponding spot-checking
data or Ward round record.
Pressing Record shortcut key again can stop recording.
In monitor mode, support NIBP auto triggered recording. Please refer
to NIBP Auto Recording for details.
- 110 -
Recording