Chapter 9 Alarm Information; Physiological Alarm Information - EDAN iM3 User Manual

Vital Signs Monitor User Manual

Chapter 9 Alarm Information

9.1 Physiological Alarm Information

During monitoring, the physiological alarms SpO
to be on and cannot be turned off.
Message
SpO
2
SpO High
2
SpO Low
2
SpO No Pulse
2
SpO Desat
2
PR
PR High
PR Low
NIBP
SYS High
SYS Low
DIA High
DIA Low
MAP High
MAP Low
TEMP
TEMP High
TEMP Low
Cause
SpO measuring value is above upper alarm limit.
2
SpO measuring value is below lower alarm limit.
2
The signal of the measurement site is too weak due to
insufficient blood supply and environmental factors, so
the monitor can't detect the pulse signal.
SpO measuring value is below the SpO
2
PR measuring value is above upper alarm limit.
PR measuring value is below lower alarm limit.
SYS measuring value is above upper alarm limit.
SYS measuring value is below lower alarm limit.
DIA measuring value is above upper alarm limit.
DIA measuring value is below lower alarm limit.
MAP measuring value is above upper alarm limit.
MAP measuring value is below lower alarm limit.
Measuring value of TEMP is above upper alarm limit.
Measuring value of TEMP is below lower alarm limit.
WARNING
No Pulse and SpO
2
Desat Limit.
2
- 55 -
Alarm Information
Desat are preset
2
Alarm level
User-selectable
User-selectable
High
High
User-selectable
User-selectable
User-selectable
User-selectable
User-selectable
User-selectable
User-selectable
User-selectable
User-selectable
User-selectable