Spot-Checking Mode; Admit Patient; Modify Patient Information; Inquire For Patient Information Via Network - EDAN iM3 User Manual

Vital Signs Monitor User Manual
6.2.3.2 Round Record Confirmation
 Choose round record
Choose manually: in original data table, click the grey reversed triangle and choose data as the
parameter's round record. Or in the original data table area, choose parameter value as round
record.
Choose automatically: the round record is subject to the latest valid measurement by default.
 Generate round record
Generate manually: by clicking round record generation key in round record area.
Generate automatically: by switching patient, power off or standby operation, the valid
measurement data will automatically generate the round record.
Round record time is subject to the time when round record generates from original data.

6.3 Spot-checking Mode

Spot-checking mode is used for spot-checking measurement and for management of multiple
patients' spot-checking data.

6.3.1 Admit Patient

There are following ways to admit patient. If monitor is connected to network server, the patient
information can be synchronized to the network server after admission.
1. Select Menu > Patient Management, click New Patient to enter new patient window.
2. Select permanent key of create new patient, or press Admit/create new patient hardkey, or
scan patient barcode by using barcode scanning shortcut key, and the monitor will
automatically finish admitting new patient (that is, series No. will be automatically added by
one and other setting items are empty by default, or the monitor updates the information to
main interface according to barcode scanning).

6.3.2 Modify Patient Information

Select Patient Management > Patient Info, or directly click patient information area in main
interface to check and modify (serial No. is not editable).
If the monitor is shut down and restarted, the patient information will be restored by default, that
is, the patient type is adult and the other information is blank.

6.4 Inquire for Patient Information via Network

In monitor, round or spot-checking mode, if the monitor is connected to network server and ADT
Query (in User Maintain) is also set to on, patient information can be checked by MRN.
Select Menu > Patient Management > New Patient > input MRN and click Search to get
patient information and the patient information will be updated to the monitor.
- 47 -
Managing Patients