Chapter 16 Storing Data In The Storage Device; Setting Storage Mode (For Monitor Mode Only); Selecting A Storage Device - EDAN iM3 User Manual

Vital Signs Monitor User Manual Storing Data in the Storage Device

Chapter 16 Storing Data in the Storage Device

16.1 Setting Storage Mode (For Monitor Mode Only)

NOTE:
The storage time varies according to the patient's parameter data volume. When store
time for single patient data reaches 240 hours, the monitor will create a new folder for
continuous data store.
Refer to Section Data management for more information about data volume in each work mode.
When data reach the maximum, you can choose to Keep storing (default) or Stop storing by
selecting Menu > System Setup > Storage > if storage space is full.
If you choose Keep storing, as soon as the data is full, the earliest data will be replaced by the
latest one.
If you choose Stop storing, the monitor will stop data storing and the latest data cannot be stored
when the data reach the maximum.

16.2 Selecting a Storage Device

To configure the storage device, select Menu > System Setup > Storage > Storage Device, and
choose the storage medium from the pop-up list as desired.
In Ward round or spot-checking mode, Storage Device is fixed as Internal Storage Device.
NOTE:
In ward round or spot-checking mode, if storage space of the system is <200 M, a prompt
will be given out. In order to store data normally, please clean the space in time.
In monitor mode, Internal Storage Device (default) and Removable Device can be selected. If
Removable Device is selected, data storage can be operative after user inputs User Maintain
password.
When you choose Internal Storage Device as the storage medium, if configured, the storage
device name will automatically become Internal Storage Device. You can select a removable
device as a working one among the plugging devices by selecting Menu > System Setup >
Storage > Storage Device and choosing the device name from the list.
After you configure the appropriate storage device, click exit. If the storage device is successfully
starting data storing, the monitor will be indicated by the symbol . If there is no enough
space in storage device, or the storage device is read-only/damaged, the symbol will be
displayed.
- 105 -