Import Patient - EDAN iM3 User Manual

Vital Signs Monitor User Manual
2. Press Admit/Create new patient hardkey
3. Use Select Patient permanent key, and then click icon + in popup window, or
4. Scan patient barcode by using barcode scanning shortcut key. The barcode is based on the 1
patient info. item.
1) In the interface of patient management, scan the barcode:
The monitor will update the patient information based on the 1
interface, user can complete relevant information inputting.
2) In other interfaces, scan the barcode:
a) If the patient based on the 1
this patient information will be inquired from the monitor and be updated as current
patient who needs to be measured. Measurement can be started without Select
Patient operation.
b) If the patient based on the 1
before:
When monitor is connected with network server and ADT Query (in User
Maintain) is also set to on, the monitor will automatically inquire for patient
information from the server based on the 1
information to the interface of creating new patient in which the items are grey and
can't be modified (except bed No.); when network server is not connected, monitor
can not inquire for patient information from the server, and then monitor will update
the patient information to interface of creating new patient according to barcode
information.
After input and Confirm patient information in the interface of creating new patient, user can
start the measurement. When the total patients in the monitor exceed the upper limit 1000,
monitor will pop up a prompt. The patients created can be viewed in Patient Management.
NOTE:
Either Bed No. or Medical Card number should be input.

5.2.2 Import Patient

Import patient
Select Patient Management > Import to choose Source (USB flash disk or Network). For
querying patient from Network, user can also directly click shortcut key
to set query condition (such as Admission Date, Department) to import patient.
If USB flash disk is selected, before importing, please set the import data file as following steps:
Step 1: use Excel to input the patient information with the format as shown below. Patient type
can only be numbers, 1 for Adult, 2 for Pediatric and 3 for Neonate.
Patient information should include:
on the front panel, or
st
patient info. item has been stored in the monitor before,
st
patient info. item hasn't been stored in the monitor
st
- 32 -
Ward Round Mode
st
patient info. item. In this
patient info. item and update the
st
> icon