Replacing The Battery - EDAN iM3 User Manual

Vital signs monitor
Hide thumbs Also See for iM3:
Table of Contents

Advertisement

Vital Signs Monitor User Manual
4
It is recommended that you measure the same ear for three times. If the three
measurements are different, select the highest temperature.
5
Remember to compare the measurement result to the regular temperature of the patient.
6
There is no gender and age limitation for using infrared ear thermometer.
7
The data saved in the thermometer is the last measurement data before the
thermometer is powered off.
Clinical repeatability: 0.12 °C (1~5 years old); 0.10 °C (>5 years old).
8
9
The infrared ear thermometer will also give error messages on its screen. For details
about the error messages, refer to the accompanying operating instructions of the
thermometer.
10 If the infrared ear thermometer frequently signals ERR alarms, the insulated board
inside the thermometer housing is malfunctioning or the ambient temperature
changes, and the monitor will delete the measurement values onscreen to avoid
misoperation.

14.3.3 Replacing the Battery

The device is supplied with one lithium cell CR2032x1.
To replacing the battery, follow the procedure:
1.
Open the battery cover by inserting a pointed object into the battery cover pin hole;
meanwhile, use thumb to push battery cover out.
2.
Hold the thermometer and flip the battery out with a small screwdriver.
3.
Insert the new battery under the metal hook on the left side ① and press the right side ②
of the battery down until the it clicks in place.
- 99 -
Monitoring TEMP

Advertisement

Table of Contents
loading

Table of Contents