Adjustable Range Of Alarm Limits - EDAN iM3 User Manual

Vital Signs Monitor User Manual
Message
Auto Measuring
AVG Measuring
Measurem. Canceled
Calibrating
Calibrat. Canceled
Leak. Test Running
Leak.Test Canceled
Resetting
Please Start
Done
Measure time out
TEMP Is Warming Up
Warm-up Over
Predict Over
Incomplete parameter input,
unable to score
No WIFI module detected
Quick Predict Over
PlaceProbeOnMeasurePlace

9.4 Adjustable Range of Alarm Limits

SpO alarm limits are listed as follows (unit %):
2
SpO
2
Cause
In automatic measuring mode
In average measuring mode
Press the "Start/stop NIBP measurement" button to stop
the measurement.
During calibrating
Calibration is over.
The leakage test is in process.
Pneumatic test over
NIBP module in resetting
NIBP module is in idle status.
NIBP measurement is completed.
No measuring result after the module entering Predict
state for 30 s.
User takes the sensor out of the bracket and TEMP is
warming up
The monitor displays this message after taking the sensor
out of the bracket and warm-up is over.
After the Predict measuring is over, the data and message
display on the interface.
In Warning-Score System interface, parameters are not
completely input.
No Wi-Fi module is detected.
Quick prediction measurement is completed.
Probe isn't placed on the measurement site.
Adjustable Range
20~100
- 65 -
Alarm Information