Table of Contents
Advertisement
To reduce the glare
Type 1
The day/night knob (A) at the bottom of the
mirror can be used to adjust the mirror to
reduce the glare from the headlights of vehi-
cles behind you during night driving.
1- Daytime position
2- Night position
Type 2
When the headlights of the vehicles behind
you are very bright, the reflection factor of
the rearview mirror is automatically changed
to reduce the glare.
Outside rearview mirrors
Normally, use the automatic mode. When the
ignition switch is turned to the "ON" posi-
tion, the reflection factor of the mirror is
automatically changed.
NOTE
Do not hang items on, or spray glass cleaner
on the sensor (1), as reduced sensitivity
could result.
Outside rearview mirrors
Adjust the outside rearview mirrors only after
making any seat adjustments so you have a
clear view to the rear of the vehicle.
WARNING
Do not attempt to adjust the outside rear-
view mirrors while driving. This can be
dangerous.
Be sure to adjust the mirrors before driv-
ing.
Your passenger's side mirror is convex.
The objects you see in the mirror will look
smaller and farther away than they
appear in a regular flat mirror.
Do not use this mirror to estimate the dis-
tance of vehicles following you when
changing lanes.
Features and controls
5
N00512200192
5-49
Advertisement
Table of Contents
