Table of Contents
Advertisement
Multi-information display
5
NOTE
The system check screen display varies
depending on your equipment.
Service reminder
When the time for periodic inspection arrives,
"PERIODIC INSPECTION" is displayed for
a few seconds after the screen that is initially
displayed when the ignition switch is turned
"ON". Refer to "Service reminder" on page
5-101.
5-96
Features and controls
S-AWC control mode display
screen
The S-AWC operation status is displayed.
Refer to "S-AWC control mode" on page
5-72.
"!" Warning display screen
(With ignition switch in the
"ON" position)
This is displayed when you press the multi-
information meter switch and switch the
warning display screen.
This mark is also displayed if there is another
warning other than the one displayed.
When the cause of the warning display is
eliminated, the "!" warning goes out automat-
ically.
NOTE
When the "!" warning is displayed, the warn-
ing display screen can be redisplayed on the
information screen.
Refer to "Information screen (With ignition
switch in the "OFF" position)" on page 5-93.
Refer to "Information screen (With ignition
switch in the "ON" position)" on page 5-97.
"Active stability control (ASC)
OFF" display screen
N00561900012
This is displayed when the Active stability
control (ASC) is turned "OFF" with the
"ASC OFF" switch.
Also, if an abnormal condition is occurred in
the ASC while driving, the "ASC OFF" dis-
play illuminates.
Refer to "ASC OFF switch" on page 5-77.
N00556000015
N00556100104
Advertisement
Table of Contents
