Table of Contents
Advertisement
CAUTION
Do not over-rely on the ASC. Even the ASC
cannot prevent the natural laws of physics
from acting on the vehicle. This system, like
any other system, has limits and cannot help
you to maintain traction and control of the
vehicle in all circumstances. Reckless driv-
ing can lead to accidents. It is the driver's
responsibility to drive carefully. This means
taking into account the traffic, road and envi-
ronmental conditions.
Be sure to use the same specified type and
size of tire on all four wheels. Otherwise, the
ASC may not work properly.
Do not install any aftermarket limited-slip
differential (LSD) on your vehicle. The ASC
may stop functioning properly.
NOTE
An operation noise may be emitted from the
engine compartment in the following situa-
tions. The sound is associated with checking
the operations of the ASC. At this time, you
may feel a shock from the brake pedal if you
depress it. These do not indicate a malfunc-
tion.
• When the ignition switch is set to the "ON"
position.
• When the vehicle is driven for a while after
the engine is turned on.
NOTE
When the ASC is activated, you may feel a
vibration in the vehicle body or hear a whin-
ing sound from the engine compartment.
This indicates that the system is operating
normally. It does not indicate a malfunction.
When the anti-lock braking system warning
light is illuminated, the ASC is not active.
Traction control function
On slippery surfaces, the traction control
function prevents the drive wheels from spin-
ning excessive, thus helping the vehicle to
start moving from a stopped condition. It also
provides sufficient driving force and steering
performance as the vehicle turns while press-
ing the acceleration pedal.
CAUTION
When driving a vehicle on a snowy or icy
road, be sure to install snow tires and drive
the vehicle at moderate speeds.
Skid control function
The skid control function is designed to help
the driver maintain control of the vehicle on
slippery roads or during rapid steering
Active stability control (ASC)
maneuvers. It works by controlling the engine
output and the brake on each wheel.
NOTE
The skid control function operates at speeds
of about 9 mph (15 km/h) or higher.
ASC OFF switch
When the ignition switch is turned to the
N00559200021
"ON" position, the ASC automatically turns
ON. If the ASC OFF switch is pressed to turn
OFF the ASC, the
comes on. Press the switch again to turn ON
the ASC.
N00546800010
CAUTION
For safety reasons, press the ASC OFF
switch when the vehicle is stopped.
Features and controls
5
N00559400209
display in the meter
5-77
Advertisement
Table of Contents
