Mitsubishi MOTORS LANCER EVOLUTION 2014 Manual page 205

Bluetooth® 2.0 interface
Enabling and disabling the voice
model and retraining
You can turn a voice model registered with
the speaker enrollment function on and off
whenever you want.
You can also retrain the system.
5
Use the following procedure to perform these
actions.
1. Press the SPEECH button (except for
vehicles with Mitsubishi Multi-Commu-
nication System) or PICK-UP button (for
vehicles with Mitsubishi Multi-Commu-
nication System).
2. Say "Voice training."
3. If you have completed a speaker enroll-
ment process once already, the voice
guide will say either "Enrollment is
enabled. Would you like to disable or
retrain?" or "Enrollment is disabled.
Would you like to enable or retrain?"
4. When enrollment is "enabled," the voice
model is on; when enrollment is "dis-
abled," the voice model is off. Say the
command that fits your needs.
Say "Retrain" to start the speaker enroll-
ment process and recreate a new voice
model. (Refer to "Speaker enrollment" on
page 5-142.)
5-144 Features and controls
Connecting the Bluetooth
interface and Bluetooth
N00564901065
Before you can make or receive hands-free
calls or play music using the Bluetooth
interface function, you must pair the Blue-
®
tooth device and Bluetooth
NOTE
 Pairing is required only when the device is
used for the first time. Once the device has
been paired with the Bluetooth
face, all you need is to bring the device into
the vehicle next time and the device will
connect to the Bluetooth
matically (if supported by the device). The
device must have Bluetooth
connect.
Up to 7 Bluetooth
®
with the Bluetooth
If multiple paired Bluetooth
available in the vehicle, the cellular phone or
music player most recently connected is auto-
matically connected to the Bluetooth
interface.
You can also change a Bluetooth
be connected.
®
2.0 To pair
®
device
To pair a Bluetooth
N00565001210
tooth
®
2.0
1. Stop your vehicle in a safe area, put the
®
2.0 interface.
®
2.0 inter-
 You cannot pair any Bluetooth
®
2.0 interface auto-
®
turned ON to
®
devices can be paired
2. Press the SPEECH button (except for
2.0 interface.
®
devices are
3. Say "Setup."
®
2.0
4. Say "Pairing Options."
®
device to
®
device with the Blue-
®
2.0 interface, follow the steps below.
gearshift lever in the "N" (Neutral) posi-
tion (manual transaxle), or the gearshift
lever in the "P" (PARK) position (Twin
Clutch SST) and pull the parking brake
lever.
NOTE
®
device with
®
the Bluetooth 2.0 interface unless the vehi-
cle is parked. Before pairing a Bluetooth
®
device with the Bluetooth 2.0 interface,
confirm that the vehicle is parked in a safe
location.
vehicles with Mitsubishi Multi-Commu-
nication System) or PICK-UP button (for
vehicles with Mitsubishi Multi-Commu-
nication System).
®