Mitsubishi MOTORS LANCER EVOLUTION 2014 Manual page 247

Hide thumbs Also See for LANCER EVOLUTION 2014:
Table of Contents

Advertisement

Automatic air conditioning with Fahrenheit scale (if so equipped)
Operating the air conditioning
system (automatic mode)
7
In normal conditions, use the system in the
AUTO mode and follow these procedures:
1. Set the blower speed selection dial to the
"AUTO" position.
2. Select the temperature control dial to the
desired temperature. The temperature can
be set within a range of around 61 to 89.
The temperature will increase as the dial
is turned to the right.
3. Set the mode selection dial to the
"AUTO" position.
The vents (except between "
recirculation/outside air, blower speed, and
ON/OFF of air conditioning will be con-
trolled automatically.
7-8
Comfort controls
NOTE
 Set the temperature at about 75 under normal
conditions.
N00731700332
 While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial. To prevent the windshield and windows
from fogging up, the vent mode will be
changed to "
speed will be reduced.
Operating the air conditioning
system (manual mode)
Blower speed and vent mode may be con-
trolled manually by setting the blower speed
selection dial and the mode selection dial to
the desired positions. To return to automatic
operation, set the dials to the "AUTO" posi-
tion.
Defrosting or defogging (wind-
shield, door windows)
" and "
"),
CAUTION
 For safety, make sure you have a clear view
through all the windows.
To remove frost or mist from the windshield
and door windows, use the mode selection
dial ("
For ordinary defrosting
Use this setting to keep the windshield and
door windows clear of mist, and to keep the
leg area heated (when driving in rain or
snow).
" or "
" and the blower
N00731800072
1. Set the mode selection dial to the "
2. Select your desired blower speed by turn-
3. Select your desired temperature by turn-
N00732400280
" or "
").
position.
ing the blower speed selection dial.
ing the temperature control dial.
"

Advertisement

Table of Contents
loading

Table of Contents