Table of Contents
Advertisement
Manual transaxle
Twin Clutch SST
LOCK
The engine is off and the steering wheel is
locked. The key can be inserted and removed
only when the switch is in this position.
ACC
Allows operation of electrical accessories
with the engine off.
ON
The engine runs and all accessories can be
used.
START
Engages the starter. After the engine starts,
release the key and it will return automati-
cally to the "ON" position.
NOTE
Your vehicle is equipped with an electronic
immobilizer. To start the engine, the ID code
which the transponder inside the key sends
must match the one registered to the immobi-
lizer computer.
(Refer to "Electronic immobilizer" on page
5-4.)
ACC power auto-cutout func-
tion
After about 30 minutes has elapsed with the
ignition switch in the "ACC" position, the
function automatically cuts out the power for
the audio system and other electric devices
that can be operated with that position.
When the ignition switch is turned from
"ACC" to the "ON" position, the power is
supplied again to those devices.
NOTE
It is possible to modify functions as follows:
NOTE
• The time until the power cuts out can be
changed to about 60 minutes.
• The ACC power auto-cutout function can
be deactivated.
For details, consult a Mitsubishi Motors
dealer.
To remove the key
For vehicles with a manual transaxle, when
removing the key, push the key in at the
"ACC" position and keep it depressed until it
is turned to the "LOCK" position, and
remove.
Manual transaxle
N00539601101
For vehicles with a Twin Clutch SST, when
removing the key, first set the gearshift lever
to the "P" (PARK) position, and then turn the
key to the "LOCK" position and remove it.
Features and controls
Ignition switch
5
N00550900139
5-51
Advertisement
Table of Contents
