Mitsubishi MOTORS LANCER EVOLUTION 2014 Manual page 91

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
This is done with the key removed from the
ignition switch.
NOTE
 The answerback function does not operate
when the key is in the ignition switch or any
door is opened.
5
Horn deactivation/reactivation
The horn answerback function can be set to
the following three conditions.
Each time the horn answerback function is
set, a chime will sound to tell you the condi-
tion of the answerback function.
Number of
Condition
chimes
One chime The horn will not sound.
Two chimes The horn will sound.
The horn will sound if the
Four chimes LOCK button (1) is pressed
twice quickly.
1. Turn the ignition switch to the "LOCK"
position. If you started the engine with the
key, remove the key from the ignition
switch.
5-30 Features and controls
2. Open the driver's door and turn the com-
bination headlights and dimmer switch to
the "OFF" position.
3. Press the LOCK button (1) for 4 to 10 sec-
onds and press the UNLOCK button (2)
during this time.
4. Release in sequence the UNLOCK and
LOCK buttons within 10 seconds of
pressing the UNLOCK button in step 3.
Changing the setting of the turn signal
lights answerback function
The turn signal lights answerback function
can be set to the following seven conditions.
Each time the turn signal lights answerback
function is set, a chime will sound to tell you
the condition of the answerback function.
Condition
Number of
chimes
To lock To unlock
One chime One flash Two flashes
Two chimes One flash No flash
Three chimes No flash Two flashes
Four chimes Two flashes One flash
Five chimes No flash One flash
Six chimes Two flashes No flash
Seven
No flash No flash
chimes
1. Turn the ignition switch to the "LOCK"
position. If you started the engine with the
key, remove the key from the ignition
switch.
2. Open the driver's door and turn the com-
bination headlights and dimmer switch to
the "OFF" position.
3. Press the UNLOCK button (2) for 4 to 10
seconds and press the LOCK button (1)
during this time.
4. Release in sequence the UNLOCK and
LOCK buttons within 10 seconds of
pressing the LOCK button in step 3.
Buzzer deactivation/reactivation
The buzzer answerback function can be
turned ON or OFF as required.
Setting of door unlock function
The door unlock function can be set to the
following two conditions.
Each time the door unlock function is set, a
chime will sound to tell you the condition of
the door unlock function.
Number of
Condition
chimes
One chime All doors unlock
Two chimes Driver's door unlock only
N00544601112