Turbocharger Operation - Mitsubishi MOTORS LANCER EVOLUTION 2014 Manual

Hide thumbs Also See for LANCER EVOLUTION 2014:
Table of Contents

Advertisement

2. Fully engage the parking brake while
depressing the brake pedal.
3. For vehicles with a manual transaxle, turn
the ignition switch to the "LOCK" posi-
tion to stop the engine, and then move the
gearshift lever to the 1st (on a uphill) or
"R" (Reverse) (on a downhill) position.
For vehicles with Twin Clutch SST, place
the gearshift lever in the "P" (PARK)
position, and then turn the ignition switch
to the "LOCK" position to stop the
engine.
NOTE
 For vehicles with Twin Clutch SST, the
engine will stop and the vehicle power will
turn off approximately 1 second after the
ignition switch is turned to the "LOCK"
position.
The reason for this is that, in the time from
when the ignition switch is turned to the
"LOCK" position until the engine stops, the
gears inside the Twin Clutch SST disengage
so that the engine will start smoothly the
next time it is started.
Two clutches installed in the Twin Clutch
SST alternately engage and disengage to
achieve smooth shifting.
In addition, the gear on the side with the free
clutch is engaged, therefore, quick shifting is
performed.
If the engine was stopped with the gear
engaged like this, it would provide resistance
the next time the engine is started. Therefore,
the gear disengages in the approximately 1-
second period until the engine stops.
 For vehicles with Twin Clutch SST, do not
operate the gearshift lever or the accelerator
pedal for approximately 1 second until the
engine stops.

Turbocharger operation

NOTE
 If the temperature inside the engine compart-
ment is high, the cooling fans (A) will con-
tinue to operate for some time even if the
engine is stopped.
Therefore, the operation sound of the cooling
fans may be heard even after the engine is
stopped. This sound is normal and does not
indicate a malfunction.
After operating for a period of time, the cool-
ing fans will stop automatically.
Turbocharger operation
CAUTION
 Do not run the engine at high speeds (for
example, by revving it or by accelerating
rapidly) immediately after starting it.
Features and controls
5
N00537300077
5-55

Advertisement

Table of Contents
loading

Table of Contents