Mitsubishi MOTORS LANCER EVOLUTION 2014 Manual page 125

Twin Clutch SST (Sportronic Shift Transmission) (if so equipped)
Twin Clutch SST control mode
switch
When the ignition switch is set to the "ON"
position, operate the Twin Clutch SST control
mode switch (A) to change the control mode.
5
When the engine is started, the control mode
is automatically set to the "Normal" mode.
Use the following procedures to change the
control mode.
To shift from "Normal" mode to "Sport"
mode
While the vehicle is stopped or being driven,
push the Twin Clutch SST control mode
switch forward.
5-64 Features and controls
To shift from "Sport" mode to "S-Sport"
mode
N00540300013
While the vehicle is stopped, push the Twin
Clutch SST control mode switch forward and
hold it for 3 seconds or more.
CAUTION
 For safety reasons, shift from the "Sport"
mode to the "S-Sport" mode only when the
vehicle is stopped.
To shift from "S-Sport" mode to "Sport"
mode or
To shift from "Sport" mode to "Normal"
mode
While the vehicle is stopped or being driven,
push the Twin Clutch SST control mode
switch rearward.
NOTE
 If the Twin Clutch SST control mode switch
is continuously pressed after a control mode
has been selected, an erroneous operation
prevention function operates and the control
mode is automatically set to the "Normal"
mode.
If you would like to select a control mode
again, return the ignition switch to the
"ACC" or "LOCK" position and restart the
engine. Then, push the Twin Clutch SST
control mode switch.
Twin Clutch SST control mode
display
When the ignition switch is set to the "ON"
position, the currently selected control mode
is displayed on the multi-information display.
Manual shift
Using the gearshift lever (A) or the sportronic
steering wheel shifters (B), shifting can be
performed manually.
N00540400098
N00540500057