Table of Contents
Advertisement
Parking brake
To park the vehicle, first bring it to a com-
plete stop, fully engage the parking brake,
and then move the gearshift lever to 1st (on a
uphill) or "R" (Reverse) (on a downhill) posi-
tion, for vehicles with a manual transaxle or
set the gearshift lever to "P" (PARK) position
on Twin Clutch SST vehicles.
To apply
1- Pull the lever up without pushing the
button at the end of hand grip.
When the parking brake is set and the
ignition switch is in the "ON" position,
the brake warning light in the instru-
ment cluster will come on.
Before driving, be sure to release the
parking brake.
To release
N00511400360
1- Pull the lever up slightly.
2- Press and hold the button at the end of
the hand grip.
3- Push the lever downward.
When parking on a hill, apply the parking
brake and turn the front wheels toward the
curb on a downhill grade, away from the curb
on an uphill grade.
Parking brake
CAUTION
Before driving, be sure that the parking
brake is fully released and brake warning
light is off.
If you drive without the parking brake fully
released, the warning display will appear on
the information screen in the multi-informa-
tion display.
If a vehicle is driven without releasing the
parking brake, the brakes will be overheated,
resulting in ineffective braking and possible
brake failure.
Warning light
Warning display
Steering wheel tilt lock lever
To adjust the steering wheel height, release
the tilt lock lever while holding the steering
wheel by hand, and raise or lower the steering
wheel to the desired height.
After adjustment, securely lock the lever by
pulling it upward.
Features and controls
5
N00511500198
5-47
Advertisement
Table of Contents
