Mitsubishi MOTORS LANCER EVOLUTION 2014 Manual page 204

1. Stop your vehicle in a safe area, put the
gearshift lever in the "N" (Neutral) posi-
tion (manual transaxle), or the gearshift
lever in the "P" (PARK) position (Twin
Clutch SST) and pull the parking brake
lever.
NOTE
 Speaker enrollment is not possible unless the
vehicle is parked. Make sure you park the
vehicle in a safe area before attempting
speaker enrollment.
2. Press the SPEECH button (except for
vehicles with Mitsubishi Multi-Commu-
nication System) or PICK-UP button (for
vehicles with Mitsubishi Multi-Commu-
nication System).
3. Say "Voice training."
4. The voice guide will say "This operation
must be performed in a quiet environment
while the vehicle is stopped. See the
owner's manual for the list of required
training phrases. Press and release the
SPEECH button when you are ready to
begin. Press the HANG-UP button to can-
cel at any time."
Press the SPEECH button to start the
speaker enrollment process.
NOTE
 If you do not start the speaker enrollment
process within 3 minutes after pressing the
SPEECH button, the speaker enrollment
function will time out.
The voice guide will say "Speaker enroll-
ment has timed out." The system will then
beep and the voice recognition mode will be
deactivated.
Bluetooth® 2.0 interface
5. The voice guide will prompt for phrase 1.
Repeat the corresponding phrase listed in
table "Enrollment commands" on page
5-158.
The system will register your voice and
then move on to the registration of the
next command. Continue the process until
all phrases have been registered.
NOTE
 To repeat the most recent voice training com-
mand, press and release the SPEECH button.
 If you press the HANG-UP button anytime
during the process, the system will beep and
stop the speaker enrollment process.
6. When all enrollment commands have
been read out, the voice guide will say
"Speaker enrollment is complete." The
system will then end the speaker enroll-
ment process and return to the main
menu.
NOTE
 Completing the speaker enrollment process
will turn on the voice model automatically.
 The commands "Help" and "Cancel" will not
work in this mode.
Features and controls
5
5-143