Table of Contents
Advertisement
Active stability control (ASC)
However, if the warning light / display do not
disappear, or if they come on again when the
vehicle is driven, have the vehicle checked by
an authorized Mitsubishi Motors dealer or
repair facility of your choice as soon as possi-
ble.
5
If the anti-lock braking system
warning light / display and brake
warning light / display come on at
the same time
Warning light
The anti-lock braking system and brake force
distribution function may not work, so hard
braking could make the vehicle unstable.
Avoid hard braking and high-speed driving.
Stop the vehicle in a safe place and contact an
5-76
Features and controls
authorized Mitsubishi Motors dealer or repair
facility of your choice.
NOTE
The anti-lock braking system warning light
and brake warning light illuminate at the
same time and the warning displays appear
alternately on the information screen in the
multi-information display.
After driving on icy roads
After driving on snow or icy roads, remove
any snow and ice which may have been left
around the wheels. On vehicles that have an
anti-lock braking system, be careful not to
damage the wheel speed sensors (A) or the
cables located at each wheel.
Front
Rear
Active stability control
N00529200035
(ASC)
The active stability control (ASC) takes over-
all control of the anti-lock braking system,
traction control function and skid control
function to help maintain the vehicle's control
and traction. Please read this section in con-
junction with the pages on the anti-lock brak-
ing system, traction control function and skid
control function.
Anti-lock braking system P.5-74
Traction control function P.5-77
Skid control function P.5-77
N00559100121
Advertisement
Table of Contents
