Table of Contents
Advertisement
2. Remove the light unit in the rear direc-
tion.
3. Remove the socket and bulb assemblies
by turning them counterclockwise.
B- Tail and stop light
C- Rear turn signal light
D- Rear side-marker light
4. Remove the bulb by pulling it out.
Tail and stop light and
Rear side-marker light
Rear turn signal light
5. To install the bulb, perform the removal
steps in reverse.
NOTE
When mounting the light unit, align the pins
(E) on the light unit with the holes in the
body.
Replacement of light bulbs
Tail lights and back-up lights
1. Open the trunk lid.
Remove the clips (A) and remove the
cover (B).
2. Remove the socket and bulb assemblies
by turning them counterclockwise.
C- Tail light
D- Back-up light
Vehicle care and maintenance
9
9-37
Advertisement
Table of Contents
