Mitsubishi MOTORS LANCER EVOLUTION 2014 Manual page 190

Hide thumbs Also See for LANCER EVOLUTION 2014:
Table of Contents

Advertisement

Headlight flasher
You can flash the high beams by pulling the
lever gently toward you (2). The lights will
go back to normal when you let go. While the
high beam is on, you will see a blue light on
the instrument panel.
NOTE
 You can flash the high beams by pulling the
lever toward you, even if the light switch is
off.
 If you turn the lights off with the head lights
set to high-beam illumination, the headlights
are automatically returned to their low-beam
setting when the light switch is next turned
to the "
" position.
Welcome light
This function turns on the front side-marker
and parking lights for about 30 seconds after
the UNLOCK button (A) on the remote con-
trol transmitter is pressed when the combina-
tion headlights and dimmer switch is in the
"OFF" or "AUTO" position (for vehicles
equipped with the automatic light control).
On vehicles equipped with the automatic light
control, the welcome light function will oper-
ate only when it is dark outside the vehicle.
N00550000185
NOTE
 While the welcome light function is operat-
ing, perform one of the following operations
to cancel the function.
• Push the LOCK button (B) on the remote
control transmitter.
N00563201159
• Turn the combination headlights and dim-
mer switch to the "
• Turn the ignition switch to the "ON" posi-
tion.
 It is possible to modify functions as follows:
• The headlights can be set to come on in the
low beam setting.
Combination headlights and dimmer switch
NOTE
• The welcome light function can be deacti-
vated.
For details, consult a Mitsubishi Motors
dealer.
Coming home light
This function turns on the headlights in the
low beam setting for about 30 seconds after
the ignition switch is turned to the "LOCK"
position.
1. Turn the combination headlights and dim-
mer switch to the "OFF" or "AUTO"
position (for vehicles equipped with the
automatic light control).
2. Turn the ignition switch to the "LOCK"
position. Also, if a key was used to start
the engine, remove the key from the igni-
tion switch.
" or "
" position.
N00547301136
Features and controls
5-129
5

Advertisement

Table of Contents
loading

Table of Contents