Mitsubishi MOTORS LANCER EVOLUTION 2014 Manual page 250

Hide thumbs Also See for LANCER EVOLUTION 2014:
Table of Contents

Advertisement

Air selection switch
Normally, use the outside air position to keep
the windshield and side windows clear and to
quickly remove fog or frost from the wind-
shield.
To change the air selection, simply press the
air selection switch. A sound will be made
every time you press the switch.
 Outside air {Indicator light (A) OFF}
Outside air is introduced into the passen-
ger compartment.
 Recirculated air {Indicator light (A) ON}
Air is recirculated inside the passenger
compartment.
When the air conditioning turns on, the air
selection is controlled automatically. When
the air conditioning turns off, the air selection
automatically goes back to the outside air
position.
N00737200241
If high cooling performance is desired, or if
the outside air is dusty or contaminated in
some way, use the recirculation position.
Switch to the outside air position every now
and then to keep the windows from fogging
up.
CAUTION
 Using recirculated air for a long time may
cause the windows to fog up.
Personalizing the air selection
(Changing the function setting)
You can change the following functions to
match your preference.
 Enable automatic air control:
When the mode selection dial or the
blower speed selection dial is set to the
"AUTO" position, the air selection switch
will also be automatically controlled.
 Disable automatic air control:
Even when the mode selection dial or the
blower speed selection dial is set to the
"AUTO" position, the air selection switch
will not be automatically controlled.
Automatic air conditioning with Celsius scale (if so equipped)
 Changing the settings:
Press the air selection switch for about 10
seconds or longer.
When the setting has changed, the system
will beep and the indicator light will flash.
• When the setting has changed from
enabled to disabled,
the system will beep three times and the
indicator will flash three times.
• When the setting has changed from dis-
abled to enabled,
the system will beep two times and the
indicator light will flash three times.
NOTE
 The factory setting is "Enable automatic air
control".
N00760000047
 While the mode selection dial is set to the
"
" position, the air selection will auto-
matically change to the outside air position,
even if the system is set to "Disable auto-
matic air control", in order to prevent win-
dows from fogging up.
Air conditioning switch
Push the switch, and the air conditioning
compressor will turn on. The air conditioning
indicator light (A) will come on.
A sound will be made every time you push
the switch.
7
N00737300239
Comfort controls
7-11

Advertisement

Table of Contents
loading

Table of Contents