Table of Contents
Advertisement
NOTE
Before purchasing a child restraint system,
try installing it in the rear seat to make sure
there is a good fit. Because of the location of
the seat belt buckles and the shape of the seat
cushion, it may be difficult to securely install
some manufacturer's child restraint systems.
If the child restraint system can be pulled
forward or to either side easily on the seat
cushion after the seat belt has been tightened,
choose another manufacturer's child restraint
system.
Depending on the seating position in the
vehicle and the child restraint system that
you have, the child restraint system can be
attached using one of the following two
methods:
• To the lower anchorage in the rear seat
ONLY if the child restraint system is com-
patible with the LATCH system (See page
4-15).
• To the seat belt (See page 4-17).
Installing a child restraint sys-
tem using the LATCH (Lower
Anchors and Tethers for chil-
dren) system
Lower anchor locations
The outboard seating positions in the rear seat
of your vehicle are equipped with lower
anchors for attaching child restraint systems
compatible with the LATCH system.
NOTE
The symbols on the seatback show the loca-
tion of the lower anchor points.
Tether anchor locations
Your vehicle has 3 attachment points on the
rear shelf, located behind the top of your rear
seat. These are for securing a child restraint
system tether strap to each of the 3 rear seat-
N00418800102
ing positions in your vehicle.
Seat and restraint systems
Child restraint systems
N00418900116
4
4-15
Advertisement
Table of Contents
