2. While holding down the tab (A), pull out
the bulb.
3. To install the bulb, perform the removal
steps in reverse.
NOTE
Before replacing the bulb, put the dome light
(front)/reading lights switch into the "OFF"
position.
When mounting the lens, align the tab (B)
with the hole on the vehicle body.
Replacement of light bulbs
Dome light (rear)
(if so equipped)
1. Insert a screwdriver into the notch of the
light assembly and pry gently to remove
the lens.
NOTE
Wrap a cloth around the tip of the screw-
driver to keep from scratching the lens.
Vehicle care and maintenance
N00944101342
9
9-39