Table of Contents
Advertisement
Automatic air conditioning with Celsius scale (if so equipped)
the "OFF" position, all fan-driven airflow
will stop.
7
Temperature control dial
Use this dial to adjust the temperature in the
passenger compartment. Turn the temperature
control dial clockwise to make the air
warmer. Turn it counterclockwise to make the
air cooler.
7-10
Comfort controls
NOTE
While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial.
N00737000236
When the temperature is set to the highest or
the lowest setting under the AUTO opera-
tion, the air selection and the air conditioning
will be automatically changed as follows.
Also, if the air selection is operated manually
after an automatic changeover, manual oper-
ation will be selected.
• Quick Heating (When the temperature is set
to the highest setting)
Outside air will be introduced and the air
conditioning will stop.
• Quick Cooling (When the temperature is set
to the lowest setting)
Inside air will be recirculated and the air
conditioning will operate.
The above indicates the factory settings. You
can personalize the air selection switch and
air conditioning switch to match your per-
sonal preferences.
Contact your Mitsubishi Motors dealer or a
repair facility of your choice for assistance.
Refer to "Personalizing the air conditioning
switch (Changing the function setting)" on
page 7-12.
Refer to "Personalizing the air selection
(Changing the function setting)" on page
7-11.
Mode selection dial
To change the amount of air flowing from the
vents, turn the mode selection dial. Refer to
"Changing the mode selection" on page 7-2.
N00737100136
Advertisement
Table of Contents
