Table of Contents
Advertisement
Combination headlights and dimmer switch
NOTE
The light auto-cutout function can be deacti-
vated.
See your authorized Mitsubishi Motors
dealer for details.
5
When you want to keep the lights
on:
If the combination headlights and dimmer
switch is turned to the "
tion again after the engine is turned off, the
about
3-minute
auto-cutout
described above will not work. The lights (the
parking lights, tail lights and license plate
lights) will stay on and will not turn off auto-
matically.
NOTE
When the engine is started using the key, if
the driver's door is opened and the key is
removed, the headlight reminder buzzer
intermittently emits a high-pitched sound. If
the key is still in the ignition switch the key
reminder buzzer intermittently emits a low-
pitched sound.
The buzzer stops when the driver's door is
closed. (A warning is also displayed in the
multi-information display.)
5-128
Features and controls
NOTE
When the engine is started using the
F.A.S.T.-key, if the driver's door is opened
and the ignition switch is in the "LOCK"
position, the headlight reminder buzzer inter-
mittently emits a high-pitched sound. If the
ignition switch is in any position other than
"LOCK", the ignition switch on reminder
buzzer intermittently emits a low-pitched
sound.
The buzzer stops when the driver's door is
closed. (A warning is also displayed in the
multi-information display.)
" or "
" posi-
Headlight reminder buzzer
function
[When using a key to start the engine]
If the driver's door is opened with the key in
the "LOCK" or "ACC" position or removed
from the ignition switch while the lights are
on, the tone will sound to remind you to turn
off the lights.
[When using the F.A.S.T.-key to start the
engine]
If the driver's door is opened with the ignition
switch in the "LOCK" or "ACC" position, or
if the ignition switch is moved to the
"LOCK" position while the lights are on, the
tone will sound to remind you to turn off the
lights.
In either case, the lights will turn off automat-
ically and so will the tone.
Or you can turn the light switch to the "OFF"
position to stop the tone.
Dimmer (high/low beam
change)
To change the headlights from high beam to
low beam and vice versa, pull the turn signal
lever to (1). Switch the headlights to low
beam as a courtesy whenever there are
oncoming vehicles, or when there is traffic
moving ahead of you. An illuminated blue
light in the instrument cluster indicates when
N00549800183
the headlights are on high beam.
N00549900142
Advertisement
Table of Contents
