Mitsubishi MOTORS LANCER EVOLUTION 2014 Manual page 167

Multi-information display
1. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to change from the setting mode
screen to the menu screen.
Refer to "Changing the function settings
(With ignition switch in the "ON" posi-
tion)" on page 5-103.
2. Lightly press the multi-information meter
5
switch to select "AVG UNIT" (fuel con-
sumption display unit setting).
3. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to display "AVG UNIT" (fuel con-
sumption display unit setting).
5-106 Features and controls
4. Lightly press the multi-information meter
switch to switch in sequence from km/L
 L/100 km  mpg (US)  mpg (UK)
 RETURN  km/L.
5. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to change the setting to the selected
unit.
NOTE
 The display units for the driving range, the
average fuel consumption, the average speed
and the momentary fuel consumption are
changed, but the units for the indicating nee-
dle (speedometer), the odometer and the trip
odometer will remain unchanged.
 If the battery is disconnected, the memory of
the unit setting is erased and is automatically
set to {mpg (US) or L/100 km}.
The distance and speed units are also changed
in the following combinations to match the
selected fuel consumption unit.
Distance
Fuel
(driving
economy
range)
mpg (US) mile (s)
mpg (UK) mile (s)
km /L km
L /100 km km
Changing the temperature unit
The temperature display unit can be switched.
1. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings
(With ignition switch in the "ON" posi-
tion)" on page 5-103.
Speed
(average
speed)
mph
mph
km /h
km /h
N00557200131