Reprocessing Parts Mechanically - Weinmann LIFE-BASE light XS Instructions For Use Manual

3. With cables: Wrap a disposable cloth around the cable and
4. Allow the parts to dry fully.
Result The parts are wipe disinfected.

8.5 Reprocessing parts mechanically

Some materials may be discolored due to mechanical
reprocessing. Discolorations do not impair the functioning of
the product.
Requirement •
•
1. The agent, doses and exposure time for the parts can be found
2. Soak the parts for at least 10 minutes in faucet water.
• Uneven surfaces and grooves (e.g.,hook and loop
fasteners, zippers, belt buckles) must be sufficiently
wetted with the disinfectant.
• The exposure time stated by the manufacturer of
the disinfectant must be observed.
pull the cable through the cloth.
The parts are probably contaminated or heavily soiled.
The hygienic reprocessing is prepared
hygienic reprocessing", page
in the cleaning and disinfection plan
disinfection plan", page
8 Hygienic reprocessing
(see "8.2 Preparing
150).
(see "8.7 Cleaning and
155).
LIFE-BASE EN 153