4 Assembly
Result
52
EN
LIFE-BASE
109
108
3. Insert 4 rings 108, 4 sleeves 109 and 4 basic elements 107 into
the drill holes on the portable unit.
30 mm
4. Use 4 screws 103, 4 protective disks 104 and 4 plain
washers 106 to screw the device to the portable unit.
When doing so, note: The holes for the portable unit and
the device must be aligned on top of each other.
5. Complete attachment of the device to the portable unit
(see "4.5.7 Completing assembly", page
The device is attached to the portable unit.
106
104
103
80).
107