Disassembly; Removing The Protective Bag From The Portable Unit - Weinmann LIFE-BASE light XS Instructions For Use Manual

7 Disassembly

7 Disassembly
7.1 Removing the protective bag from
7.1.1 Removing the protective bag for
Result
110 EN LIFE-BASE
This section describes the disassembly of all versions of
the portable unit and accessories. If there are significant
differences in the disassembly of the versions, these are explained.
Otherwise, disassembly is the same for all versions.
the portable unit
LIFE-BASE light
1. Place the protective bag on a flat, firm surface.
2. Open the hook and loop fasteners on the front and back of
the protective bag.
3. If available: Pull the breathing circuit on the front through
the opening on the protective bag.
4. Remove the portable unit from the protective bag.
The protective bag is removed from the portable unit.