Weinmann LIFE-BASE light XS Instructions For Use Manual page 40

4 Assembly
Result
4.4.2 Attaching the oxygen cylinder
Applies to
40 EN LIFE-BASE
5. Hook the tensioning hoop (1) into the lock-in position on
the cylinder brackets.
6. Close the latches on the cylinder brackets (2).
7. Check the oxygen cylinder for firm fit.
When doing so, note:
• The latches on the cylinder brackets must not come open.
• The oxygen cylinder must not move.
8. If the oxygen cylinder moves: Adapt the length of the cylinder
brackets to the oxygen cylinder.
The oxygen cylinder is attached to the portable unit.
Ø 115 mm-120 mm
LIFE-BASE 4 NG
1
2