Weinmann LIFE-BASE light XS Instructions For Use Manual page 80

4 Assembly
4.5.7 Completing assembly
Requirement
Result
80 EN LIFE-BASE
The device is attached to the portable unit.
1. If available: Attach the protective bag to the portable unit
(see "4.1 Attaching the protective bag to the portable unit",
page 25).
2. If available: Attach the accessories bag to the portable unit
or protective bag
the portable unit or protective bag", page
3. If available: Attach the shoulder strap to the handle
(see "4.3.1 Attaching the shoulder strap to the handle",
page 36).
4. If available: Attach the tension belts to the portable unit
(see "4.3.3 Attaching the tension belts to the portable unit",
page 37).
5. If available: Attach the oxygen cylinder to the portable unit
(see "4.4 Attaching the oxygen cylinder to the portable unit",
page 38).
6. If available: Connect the accessories to the device.
7. If available: Fastening the portable unit to the wall or
ceiling mounting
wall mounting or ceiling mounting", page 90)
or
Fasten the portable unit to the pole or equipment rail
(see "6.3 Fastening the portable unit to the pole or equipment
rail", page 95).
8. Perform a function check
Attachment of the devices to the portable unit is complete.
(see "4.2 Attaching the accessories bag to
(see "6.1 Fastening the portable unit to a
(see "5 Function check", page
32).
81).