Weinmann LIFE-BASE light XS Instructions For Use Manual page 59

Applies to
Required auxiliary
equipment
Attaching the monitor/defibrillator
• MEDUCORE Standard
• MEDUCORE Standard
Screwdriver with crosshead PH1
1. If available: Fasten the shoulder strap to the portable unit
(see "4.3 Attaching the belt to the portable unit", page
2. Position the device with the control panel membrane facing
downwards.
MEDUCORE Standard
on LIFE-BASE 3 NG
3. Determine the holes for the device on the spacer plate.
4. Place the spacer plate on the device.
When doing so, note:
• Every device has a certain position.
2
MEDUCORE Standard
On LIFE-BASE 1 NG XL
MEDUCORE Standard
LIFE-BASE
4 Assembly
36).
2
EN 59