7. With MEDUCORE Standard on LIFE-BASE 3 NG:
Place the cable for the power supply in the cable clamp 105.
8. With MEDUCORE Standard on LIFE-BASE 3 NG:
Screw 1 cable clamp 105 and 1 protective disk 104
to the spacer plate using 1 screw 101.
When doing so, note: The flat side of the cable clamp
faces down.
9. With LIFE-BASE 1 NG XL:
•
Undo the knurled screws.
•
Pull out the hangers.
MEDUCORE Standard
LIFE-BASE
4 Assembly
101
104
105
12 mm
EN
61