Required Auxiliary Equipment - Weinmann LIFE-BASE light XS Instructions For Use Manual

7 Disassembly
Applies to
Required auxiliary
equipment
Requirement
134 EN LIFE-BASE
Disassembling the monitor/defibrillator
• MEDUCORE Standard
• MEDUCORE Standard
Screwdriver with crosshead PH1
Disassembly is prepared
page 123).
1. With LIFE-BASE 1 NG XL:
• Undo the knurled screws.
• Pull out the hangers.
• Tighten the knurled screws.
2. Place the portable unit and device with the control panel
membrane facing downwards.
2
(see "7.5.1 Preparing disassembly",
Figure without device