Weinmann LIFE-BASE light XS Instructions For Use Manual page 45

Required auxiliary
equipment
The attachment of MEDUMAT Transport to LIFE-BASE light is
described in a separate section
LIFE-BASE 1 NG and LIFE-BASE 4 NG (with protective hoops)",
page 51).
Screwdriver with crosshead PH1
1. If available: Fasten the shoulder strap to the portable unit
(see "4.3 Attaching the belt to the portable unit", page
2. Position the device with the control panel membrane facing
downwards.
LIFE-BASE light LIFE-BASE light
3. Determine the holes for the device on the portable unit.
4. Place the portable unit on the device.
When doing so, note:
• MEDUMAT Easy
the portable unit.
• MEDUMAT Easy
together with MODUL to the portable unit.
• The holes for the device and the portable unit must be
aligned on top of each other.
(see "4.5.4 Attaching the device to
CPR
can be attached in 2 positions to
CPR
can be attached individually or
LIFE-BASE
4 Assembly
36).
CPR
MEDUMAT Easy
or MODUL
EN 45