Weinmann LIFE-BASE light XS Instructions For Use Manual page 51

Result
4.5.4 Attaching the device to LIFE-BASE 1 NG and
Applies to
Required auxiliary
equipment
102
MEDUMAT Standard
9. Use 4 screws 102 to screw the spacer plate to the portable
unit.
When doing so, note: The holes for the portable unit and
the spacer plate must be aligned on top of each other.
10. Complete attachment of the device to the portable unit
(see "4.5.7 Completing assembly", page
The device is attached to the portable unit.
LIFE-BASE 4 NG (with protective hoops)
MEDUMAT Transport
Screwdriver with crosshead PH1
1. Place the portable unit on a flat, firm surface.
2. If available: Fasten the shoulder strap to the portable unit
(see "4.3 Attaching the belt to the portable unit", page
2
LIFE-BASE
4 Assembly
16 mm
80).
36).
EN 51